Comer Metal Shear 3514-7WB
The new DRÄCO Angle Shaped Metal Shear is able to cut metal up to 2 mm 14 gauge and through seams 4 times 0.9 mm in thickness.
This tool can cut openings in spiral pipes or any kind of ducts oval or round, for inspection, modification, maintenance or cleaning purposes. Because the tool is angle shaped it can be used for hard to get at places, corner cuts, etc.
Ideal for square and circular cut outs and for the installation of fittings in spiral round or oval ductwork. The smallest radius possible is 45 mm (2”), max thickness 2 mm 14 gauge metal, 1.5 mm 18 gauge stainless steel and 3 mm 10 gauge aluminum, 500 watt motor, weight 2 kg, 4.3 pounds.
The Angle Shaped Metal shear cuts right or left in radius, through a seam in one operation. PVC coated and colored materials are cut without sparks or scratch marks. The cuts are burr and distortion free.
No troublesome metal chips can fall out or into the cavities with the double cut system, the waste comes out at the top of the shear as a stripIn quotation cart
- Ventilation shafts and pipes for modification
- Heating, Ventilating
- Limited space, or hard to get at places.
|steel; 400 N/mm²; mm||2.0||2.0||2.0|
|stainless steel; 600 N/mm²; mm||1.5||1.5||1.5|
|stainless steel; 800 N/mm²; mm||1.2||1.3||1.3|
|aluminium; 250 N/mm²; mm||3.0||3.0||3.0|
|tightest radius; ; mm||45||200||45|
|working speed; ; m/min||5-7||5 - 7||5 -7|
|strokes; ; min-1||2000||2400||2400|
|motor capacity; ; Watt||500||500||500|
|weight; ; kg||2||2||2|
|Spiral duct; 400 N/mm²; mm||4 x 0.75||4 x 0.90||4 x 0.75|
|duct- & Pittsburgh Seam; 400N/mm²; mm||4 x 0.75||4 x 0.90||4 x 0.75|
|double lock seam; 250 N/mm²;mm||4 x 0.75||6 x 0.75||6 x 0.75|
|lead; ; mm||4||4||4|