Rol-Bender Mini-Bender 3/200

bending from 0°-90°, bending height 5-200 mm

Light weighted bender, with 2 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark. With only 2 guide rollers the Mini-Bender has a lot more curve mobility than his bigger brother the EcO-Bender 3.

Rol-Beader Panel Beader PB 200V

Mobile Beading tool for Standing Seam Panels and sheets up to 38 mm profiling height. 

Ideal for off setting standing seam panels for clip relief clips.

Rolbender SET 2S3: EcO-Bender 3/350 & Disc-Bender DB 41

A handy set for bending up to 90º (with EcO-Bender 3/350) till 350 mm and after that bending it up to even 180º (with Disc-Bender DB 41).

This set contains:

• EcO-Bender 3/350
• Disc-Bender DB 41
• Tin Man's gloves Perfect Fit
• Roll-up tape measure 5 m
• Tin man´s pencil
• in a practical transport box

Rolbender SET 2S2: EcO-Bender 3/200 & Disc-Bender DB 41 S2

A handy set for bending up to 90º (with EcO-Bender 3/200) and after that bending it up to even 180º (with Disc-Bender DB 41 S2).

This set contains:

• EcO-Bender 3/200
• Disc-Bender DB 41 S2
• Tin Man's gloves Perfect Fit
• Roll-up tape measure 5 m
• Tin man´s pencil
• in a practical transport box

Rolbender SET 4: EcO-Bender 3/200 & Disc-Bender DB41S2 & BKK50

A handy set for bending up to 90º (with EcO-Bender 3/200) till 200 mm and after that bending it up to even 180º (with Disc-Bender DB 41 S2). Flange- and curve bender BKK 50 with max. bending height 50 mm (2 inches) is needed for curved work pieces and tight radii.

This set contains:

• EcO-Bender 3/200
• Disc-Bender DB 41 S2
• Flange- and curve bender BKK 50
• Tin Man's gloves Perfect Fit
• Roll-up tape measure 5 m
• Tin man´s pencil
• in a practical transport box

Rolbender SET 5: EcO-Bender 3/200 & Disc-Bender DB41 & BKK50

A handy set for bending up to 90º (with EcO-Bender 3/200) till 200 mm and after that bending it up to even 180º (with Disc-Bender DB 41). Flange- and curve bender BKK 50 with max. bending height 50 mm (2 inches) is needed for curved work pieces and tight radii.

This set contains:

• EcO-Bender 3/200
• Disc-Bender DB 41
• Flange- and curve bender BKK 50
• Tin Man's gloves Perfect Fit
• Roll-up tape measure 5 m
• Tin man´s pencil
• in a practical transport box

Rolbender SET 6: EcO-Bender 4/200 & Disc-Bender DB41S2 & BKK50

A handy set for bending up to 100º (with EcO-Bender 4/200) till 200 mm and after that bending it up to even 180º (with Disc-Bender DB 41 S2). Flange- and curve bender BKK 50 with max. bending height 50 mm (2 inches) is needed for curved work pieces and tight radii.

This set contains:

• EcO-Bender 4/200
• Disc-Bender DB 41 S2
• Flange- and curve bender BKK 50
• Tin Man's gloves Perfect Fit
• Roll-up tape measure 5 m
• Tin man´s pencil
• in a practical transport box

Rolbender SET 8: Duo-Mini-Bender 3/200 & Duo-Disc-Bender DB 42 SET

A handy set for bending up to 90º (with Duo-Mini-Bender 3/200) and after that bending it up to even 180º (with Duo-Disc-Bender DB 42).

This set contains:

• Duo-mini-Bender 3/200
• Duo-Disc-Bender DB 42
• in a practical transport box

Rol-Beader Panel Beader PB 200F

Mobile Beading tool for Standing Seam Panels and sheets up to 38 mm profiling height. Generates flat beads (20 mm).

Rol-Beader Panel Beader PB 200R

Mobile Beading tool for Standing Seam Panels and sheets up to 38 mm profiling height. Generates round beads (6 mm).

Multi-bender SET MB7: Multi-Bender 200 SET incl. 7 forming rollers

Universal device for beading, settling and edges, bend height 44-244 mm

Ideal device for beading sheet metal and folded or pre-profiled material with interchangeable forming rollers. Beading or offset depth (depending on the form roller type) up to approx. 3.5 mm. Side-folding guide wings for comfortable editing of straight lines and curves.

This set contains:

• Multi-Bender MB200
• 7 pair of chosable forming rollers
• Handle
• Guidance device
• in a practical transport box

Rolbender SET 7: EcO-Bender 3/350 & Disc-Bender DB 41 S2

A handy set for bending up to 90º (with EcO-Bender 3/350) till 350 mm and after that bending it up to even 180º (with Disc-Bender DB 41 S2).

This set contains:

• EcO-Bender 3/350
• Disc-Bender DB 41 S2
• Tin Man's gloves Perfect Fit
• Roll-up tape measure 5 m
• Tin man´s pencil
• in a practical transport box

Rol-Bender Duo-VARIO-Bender DVB200

bending from 0°-90°, bending height 5-200 mm

Everyone knows this. You want to put material that is a bit thicker and it is not possible because the material does not fit between the rollers. You and the bender are strong enough, but the material just does not fit. That is past tense. Now there is the new Duo-VARIO bender VB200. With the infinitely adjustable top roller you will be able to bend thicker plate up to 2.0 mm light metal or even 4 mm lead.

By using an adapter two Vario-Benders are connected to a Duo-Vario-Bender DVB200. The DVB200 is extremely comfortable when working on long and straight metal sheets, but if you need to work on shorter sheets you can easily unscrew the adapter and work with two single Vario-Benders.

Rol-Bender EcO-Bender3/350 S1

bending from 0°-90°, bending height 5-350 mm

Light weighted bender, with 4 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

Rol-Bender Supra Bender SB 200 without handle

bending from 0°-120°, bending height 30-200 mm

Enables overstretching to compensate for spring back of e.g. stainless steel. Fabrication of drip edges, windowsills, eaves cladding, valley construction and many more. Light weighted bender, with 4 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

Rol-Bender Supra-Bender SB 350 without handle

bending from 0°-120°, bending height 30-350 mm

Enables overstretching to compensate for spring back of e.g. stainless steel. Fabrication of drip edges, windowsills, eaves cladding, valley construction and many more. Light weighted bender, with 4 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

Rol-Bender up to 100º EcO-Bender4/350

bending from 0°-100°, bending height 5-350 mm

Light weighted bender, with 4 guide rollers and a removable ergonomic grip handle. Handle offers a convenient grip even when completely extended to 350 mm. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

Rol-Bender up to 100º EcO-Bender4/200 without handle

bending from 0°-100°, bending height 5-200 mm

Light weighted bender, with 4 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

Rol-Bender up to 100º EcO-Bender4/350 without handle

bending from 0°-100°, bending height 5-350 mm

Light weighted bender, with 4 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

Rol-Bender Mini-Bender 4/200

bending from 0°-100°, bending height 5-200 mm

Light weighted bender, with 2 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark. With only 2 guide rollers the Mini-Bender has a lot more curve mobility than his bigger brother the EcO-Bender 4.

Rol-Bender Flange- and Curve Bender BKK 50 S2

bending from 0°-90°, bending height 5-50 mm

When standard benders give up the handy little flange- and curve bender BKK 50 is needed. Ideal for curved work pieces, tight radii and even standing seam profiles.

Rol-Bender Mini-Bender 4/350

bending from 0°-100°, bending height 5-350 mm

Light weighted bender, with 2 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark. With only 2 guide rollers the Mini-Bender has a lot more curve mobility than his bigger brother the EcO-Bender 4.

Rol-Bender Duo-Mini-Bender 4/200

bending from 0°-100°, bending height 5-200 mm

Light weighted bender, with 4 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark. 

Rol-Bender Duo-Mini-Bender 4/350

bending from 0°-100°, bending height 5-350 mm

Light weighted bender, with 4 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark. 

Rol-Bender Duo-EcO-Bender 4/200

bending from 0°-100°, bending height 5-200 mm

With 8 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark. 

Rol-Bender Duo-EcO-Bender 4/350

bending from 0°-100°, bending height 5-350 mm

With 8 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark. 

Rol-Bender Duo-EcO-Bender 3/350

bending from 0°-90°, bending height 5-350 mm

With 8 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark. 

Rol-Bender Duo-EcO-Bender 3/200

bending from 0°-90°, bending height 5-200 mm

With 8 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark. 

Rol-Bender Duo-Mini-Bender 3/350

bending from 0°-90°, bending height 5-350 mm

Light weighted bender, with 4 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark. 

Rol-Bender up 100° Duo-Mono-Bender 4/350

bending from 0°-100°, bending height 5-350 mm

Light weighted bender, with 4 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

Rol-Bender up to tot 100° Duo-Mono-Bender 4/200

bending from 0°-100°, bending height 5-200 mm

Light weighted bender, with 4 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

Rol-Bender Duo-Mono-Bender 3/350

bending from 0°-90°, bending height 5-350 mm

Light weighted bender, with 4 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

Rolbender SET 3/4003: EcO-Bender & Disc-Bender & BKK 25 PINK EDITION

A handy set for bending straight and curved metal up to 90º (with EcO-Bender 3/200 & BKK 25) and after that bending it up to even 180º (with Disc-Bender DB 41).

This set contains:

• EcO-Bender 3/200
• Disc-Bender DB 41
• Flange- & Curve Bender BKK 25
• Tin Man's gloves Perfect Fit
• Roll-up tape measure 5 m
• Tin man´s pencil
• in a practical transport box

Signal Colour RAL  4003! "Heather Violet". The striking color of the PINK EDITION also has the advantage that the tool can easily be found on the construction site and/or work shop. 

Rol-Bender Duo-Mono-Bender 3/200

bending from 0°-90°, bending height 5-200 mm

Light weighted bender, with 4 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

Rol-Bender EcO-Bender3/200 PINK EDITION

bending from 0°-90°, bending height 5-200 mm

Light weighted bender, with 4 guide rollers and a removable ergonomic grip handle. Handle offers a convenient grip even when completely extended to 200 mm. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

Signal Colour RAL  4003! The striking color "Heather Violet" of the PINK EDITION also has the advantage that the tool can easily be found on the construction site and/or work shop.

Rol-Bender Flange- & Curve Bender BKK 25 PINK EDITION

bending from 0°-90°, bending height 5-25 mm

When standard benders give up the handy little flange- and curve bender BKK 25 is needed. Ideal for curved work pieces and tight radii.

Signal Colour RAL  4003! The striking color "Heather Violet" of the PINK EDITION also has the advantage that the tool can easily be found on the construction site and/or work shop. 

Rol-Bender Disc Bender DB 41 (single) PINK EDITION

bending from 90°-180°, bending height 8-40 mm

With the disc-bender you can bend a right angle of 90° to 180°. Perfect for eaves, hems, cross seams and flashings.

Signal Colour RAL  4003! The striking color "Heather Violet" of the PINK EDITION also has the advantage that the tool can easily be found on the construction site and/or work shop. 

Automatic Power Seamer K9-1-WAD

Model for electric closing of the double seam, for profile heights of 25 - 60 mm

Model K9-1-WAD includes the set of forming rolls for single seam (K9-1-WR), set of cutting rolls (K9-1-AR), the dual-safety-switch (K9-1-DF).

The K9-1-WAD closes sheet metal, aluminum, zinc and copper up to 0.8 mm and stainless steel up to 0.5 mm.

Automatic Power Seamer K9-1

Basic model for electric closing of the double seam, for profile heights of 25 - 60 mm

The K9-1 closes sheet metal, aluminum, zinc and copper up to 0.8 mm and stainless steel up to 0.5 mm.

Power Seamer K9-1-ERB

Model for electric closing of round profiles, for profile heights of 48 - 65 mm

Increasingly Tinsmith specialized companies, engage themselves with the assembling of self-feeding Roof Profile Panels. Especially to close the seam of industrial manufactured profiles, DRÄCO developed a multilaterally, usable Power Seamer K9-1 ERB. The machine can close straight, tapered, convex or concave Profiles of many manufacturers. The seamer has an ingenious pressure adjustment. The pressure can be adjusted variable, to achieve an optimum closed seam.

Automatic Power Seamer for single seam K9-1-GWS

2 forming station model for single lock seam, for profile heights of 25 - 60 mm

Ideal angle-seam closer for facades, round dormers and domed roofs. Minimum radius 60 cm.

Double Lock Hand Seamer K 7

closes the double seam up to 0.8 mm sheet metal, closing length 210 mm

This double lock hand tool is used after the single lock is closed. Ideal for starting and ending or continuous double lock seaming

Single Lock Hand Seamer K 8

closes the single seam up to 0.8 mm sheet metal, closing length 210 mm

Ideal for starting seam, for short facades and areas with difficult access or an entire roof or wall.

Hand seamer with angle-adjustable lever K8S1

closes the single seam up to 0.8 mm sheet metal, closing length 210 mm

Have you always been annoyed when the angeled roof on the facade gets in the way, or you bump into a wall while trying to close the seam? The solution is now available, the new K8 with swiveling lever.

If you already own a K8, you can retrofit it by exchanging the lever.

Single Lock Hand Seamer K8N

closes the single seam up to 0.8 mm sheet metal, closing length 200 mm

A unique design for closing a single lock seam. This standard tool can be delivered in different lengths.

Single Lock Hand Seamer extra long K8NL

XL version, closes the single seam up to 0.8 mm sheet metal, closing length 350 mm

A unique design for closing a single lock seam. This standard tool can be delivered in different lengths.

Single Lock Hand Seamer for Arches K 5

fast closing of profiled panels for arches, domes, dormers and barrel vaulted roofs up to 0,8 mm sheet metal, closing length 70 mm

Batten Hand Seamer K 6-1

Handseamer for Batten Seams T-caps from 45 to 65 mm

Batten cap systems not only contribute to the architectural design of the roof but are highly functional and one of the oldest roofing systems still in use.

Hand Seamer for German Batten Seam K 6-2

Handseamer for Batten Seams T-caps from 45 to 145 mm

Batten cap systems not only contribute to the architectural design of the roof but are highly functional and one of the oldest roofing systems still in use.

Drip Edge Bender K 11

to make a clean bend at drip edges without leaving marks

bends from 0° to more than 90° because of its wide opening

closing length 250 mm
weight 1,7 kg

Drip Edge Seamer K 12

follow up tool to the drip edge bender

permits a clean and fast locking of the drip edge

closing length 200 mm
weight 2 kg

Decoiler K1-CW/100

mobile, with 5-armed reel, incl. 2 swivel castors and 2 fixed castors

Width coil car = 1000 mm
Recommended coil width = up to 800 mm
Carrying capacity up to max. 2000 kg

Decoiler K1-CW/125

mobile, with 5-armed reel, incl. 2 swivel castors and 2 fixed castors

Width coil car = 1250 mm
Recommended coil width = up to 1000 mm
Carrying capacity up to max. 1500 kg

mobile Decoiler K1-CW/150

mobile, with 5-armed reel, incl. 2 swivel castors and 2 fixed castors

Width coil car = 1500 mm
Recommended coil width = up to 1250 mm
Carrying capacity up to max. 1500 kg

Decoiler with Cross Cut Attachment K1-CW/100AQ

mobile, with 5-armed reel, incl. 2 swivel castors and 2 fixed castors

Mobile Decoiler K1-CW/100AQ including decoiling and cross cut attachment K1-100AQ.

Width coil car = 1000 mm
Recommended coil width = up to 800 mm
Carrying capacity up to max. 2000 kg

Decoiler with Cross Cut Attachment K1-CW/125AQ

mobile, with 5-armed reel, incl. 2 swivel castors and 2 fixed castors

Mobile Decoiler K1-CW/125AQ including decoiling and cross cut attachment K1-125AQ.

Width coil car = 1250 mm
Recommended coil width = up to 1000 mm
Carrying capacity up to max. 1500 kg

Decoiler with Cross Cut Attachment K1-CW/150AQ

mobile, with 5-armed reel, incl. 2 swivel castors and 2 fixed castors

Mobile Decoiler K1-CW/150AQ including decoiling and cross cut attachment K1-150AQ.

Width coil car = 1500 mm
Recommended coil width = up to 1250 mm
Carrying capacity up to max. 1500 kg

Decoiler with Cutting devices K1-CW/100AQ/LSE/S

Decoiler with Cutting devices K1-CW/125AQ/LSE/S

mobile, with 5-armed reel, incl. 2 swivel castors and 2 fixed castors

Decoiler with Cutting devices K1-CW/150AQ/LSE/S

mobile, with 5-armed reel, incl. 2 swivel castors and 2 fixed castors

DRÄCO Core K 1-CWz/100

fits DRÄCO decoiler K1-CW/100

DRÄCO Core K 1-CWz/100

fits DRÄCO decoiler K1-CW/125

DRÄCO Core K 1-CWz/150

Decoiling & Cross Cut Attachment K1-100AQ

The Slitter Attachment K1-AQ can be fitted to any DRÄCO Decoiler or can be mounted on to a workbench.

width = 1000 mm
advised coil-width = 800 mm

Decoiling & Cross Cut Attachment K1-125AQ

The Slitter Attachment K1-AQ can be fitted to any DRÄCO Decoiler or can be mounted on to a workbench.

width = 1250 mm
advised coil-width = 1000 mm

Decoiling & Cross Cut Attachment K1-150AQ

The Slitter Attachment K1-AQ can be fitted to any DRÄCO Decoiler or can be mounted on to a workbench.

width = 1500 mm
advised coil-width = 1250 mm

Mechanical measuring device K1-LAQ

Optional length measuring device for the decoiling and cross cut attachment AQ for the DRÄCO mobile decoilers

Lengths wise device K1-LSE-1

Length cut slitter device (without shear) for the Decoiling & Cross Cutt Attachment K1-AQ

Coil Trolley K1-AG100

easy transportation without danger of coils up to 1500 mm width

capacity = 200 kg
weight = 24 kg

Coil Trolley K1-AG125

easy transportation without danger of coils up to 1500 mm width

capacity = 200 kg
weight = 28 kg

Guide for Coil Trolley K1-AGb100

coil width mm = 0 - 900
kg = 4.5

Guide for Coil Trolley K1-AGb125

coil width mm = bis 1150 mm
kg = 5,0

Quick-Strap K1-CSg

No more damaged coils. The 2500 x 48 mm wide strap eliminates damage caused by wire, string, rope or tape.

Quick fastening and release using Velcro fastening and is ideal for work-shops and site- work, also for safe transporting of coils, to and from the site.

Hand Operated Detail Folding Brake K1-AGNU-3

with frame

ideal for the roof & facade industry, drip edges, transverse fences, flood defense, losange's are simple and quick to manufacture.

working width  = 1120 mm
weight  = 80 kg only

Hand Operated Folding Brake K1-AGN-3

without frame, ideal for transport, for mounting on trailer or worktable.

ideal for the roof & facade industry, drip edges, transverse fences, flood defense, losange's are simple and quick to manufacture.

working width = 1120 mm
weight = 57 kg only

Cross Cut Roll-Slitter-Shear K1-AGNRS-4

with linear guide for K1-AGN-3 and K1-AGNU-3   *NEW*

cutting length 1000 mm
weight = 5 kg

This new roller shear can be converted into a profiling head. The corresponding rollers can be used by the DRÄCO Multibender 200.

Fixed Clip Former K10-FH-25

Bending and punching 2 holes in one operation, height 25 mm / 1".

Fixed Clip Former K10-FH-38

Bending and punching 2 holes in one operation, height 38 mm / 1.5".

Rol-Bender up to 100º EcO-Bender4/200

bending from 0°-100°, bending height 5-200 mm

Light weighted bender, with 4 guide rollers and a removable ergonomic grip handle. Handle offers a convenient grip even when completely extended to 200 mm. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

Rol-Bender EcO-Bender3/200 with O-Grip

bending from 0°-90°, bending height 5-200 mm

Light weighted bender, with 4 guide rollers and a removable ergonomic grip handle. Handle offers a convenient grip even when completely extended to 200 mm. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

Rol-Bender EcO-Bender3/200 S1

bending from 0°-90°, bending height 5-200 mm

Light weighted bender, with 4 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

Rol-Bender EcO-Bender3/350 with O-grip

bending from 0°-90°, bending height 5-350 mm

Light weighted bender, with 4 guide rollers and a removable ergonomic grip handle. Handle offers a convenient grip even when completely extended to 350 mm. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

Rol-Bender Mini-Bender 3/200

bending from 0°-90°, bending height 5-200 mm

Light weighted bender, with 2 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark. With only 2 guide rollers the Mini-Bender has a lot more curve mobility than his bigger brother the EcO-Bender 3.

Rol-Bender Mini-Bender 3/350

bending from 0°-90°, bending height 5-350 mm

Light weighted bender, with 2 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark. With only 2 guide rollers the Mini-Bender has a lot more curve mobility than his bigger brother the EcO-Bender 3.

Rol-Bender Supra Bender SB 200 with handle

bending from 0°-120°, bending height 30-200 mm

Enables overstretching to compensate for spring back of e.g. stainless steel. Fabrication of drip edges, windowsills, eaves cladding, valley construction and many more. Light weighted bender, with 4 guide rollers and a removable ergonomic grip handle. Handle offers a convenient grip even when completely extended to 200 mm. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

Rol-Bender Supra-Bender SB 350 with handle

bending from 0°-120°, bending height 30-350 mm

Enables overstretching to compensate for spring back of e.g. stainless steel. Fabrication of drip edges, windowsills, eaves cladding, valley construction and many more. Light weighted bender, with 4 guide rollers and a removable ergonomic grip handle. Handle offers a convenient grip even when completely extended to 350 mm. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

Rol-Bender VARIO-Bender VB200

bending from 0°-90°, bending height 5-200 mm + variable thickiness!

Everybody knows this: You want to bend metal a bit thicker than usually, but there is no space between the forming rollers. You and the bender are strong enough, but there is simply no space for your metal. This is over. Now there is the new VARIO Bender VB200. 

Rol-Bender Disc Bender DB 41 (single)

bending from 90°-180°, bending height 8-40 mm

With the disc-bender you can bend a right angle of 90° to 180°. Perfect for eaves, hems, cross seams and flashings.

Rol-Bender Duo Disc Bender Combi DB42 (double)

bending from 90°-180°, bending height 8-40 mm

With the disc-bender you can bend a right angle of 90° to 180°. Perfect for eaves, hems, cross seams and flashings. The double disc-bender is ideal for long workpieces. Composed of 2 single Disc Benders DB41 and adapter.

Rol-Bender Disc-Bender DB41S2 (single)

bending from 90°-180°, bending height 8-40 mm

With the disc-bender you can bend a right angle of 90° to 180°. Perfect for eaves, hems, cross seams and flashings.
DB41S2 designed with swiveling guide roller for placing the tool easily in work pieces that are difficult to access.

Rol-Bender Duo Disc Bender Combi DB42-1S2 (double)

bending from 90°-180°, bending height 8-40 mm

With the double disc-bender you can bend a right angle of 90° to 180°. Perfect for eaves, hems, cross seams and flashings. The double disc-bender is ideal for long workpieces. Composed of two Single Disc Benders DB41S2 with swiveling guide roller and adapter.

Rol-Bender Flange- & Curve Bender BKK 25

bending from 0°-90°, bending height 5-25 mm

When standard benders give up the handy little flange- and curve bender BKK 25 is needed. Ideal for curved work pieces and tight radii.

Rol-Bender Flange- and Curve Bender BKK 50

bending from 0°-90°, bending height 5-50 mm

When standard benders give up the handy little flange- and curve bender BKK 50 is needed. Ideal for curved work pieces and tight radii.

Rol-Bender Duo-Mini-Bender 3/200

bending from 0°-90°, bending height 5-200 mm

Light weighted bender, with 4 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark. 

Rolbender SET 2: EcO-Bender & Disc-Bender SET

A handy set for bending up to 90º (with EcO-Bender 3/200) and after that bending it up to even 180º (with Disc-Bender DB 41).

This set contains:

• EcO-Bender 3/200
• Disc-Bender DB 41
• Tin Man's gloves Perfect Fit
• Roll-up tape measure 5 m
• Tin man´s pencil
• in a practical transport box
  
  

Rolbender SET 3: EcO-Bender & Disc-Bender & BKK 25

A handy set for bending straight and curved metal up to 90º (with EcO-Bender 3/200 & BKK 25) and after that bending it up to even 180º (with Disc-Bender DB 41).

This set contains:

• EcO-Bender 3/200
• Disc-Bender DB 41
• Flange- & Curve Bender BKK 25
• Tin Man's gloves Perfect Fit
• Roll-up tape measure 5 m
• Tin man´s pencil
• in a practical transport box
  
  

Rol-Bender Multi-Bender 200

Universal device for beading, settling and edges, bend height 44-244 mm

Ideal device for beading sheet metal and folded or pre-profiled material with interchangeable forming rollers. Beading or offset depth (depending on the form roller type) up to approx. 3.5 mm. Side-folding guide wings for comfortable editing of straight lines and curves.

DRÄCO Adapter K1-AGNARS Beading Adapter

Using this adapter, the beading rollers of the DRÄCO Multi-Bender MB200 can be fitted to the DRÄCO roller shear K1-AGNU-4.