Refine your search result

Roof & Wall

EcO-Bender 4/200 PINK EDITION

Rol-Bender EcO-Bender 4/200 PINK EDITION

bending from 0°-100°, bending height 5-200 mm

Light weighted bender, with 4 guide rollers and a removable ergonomic grip handle. Handle offers a convenient grip even when completely extended to 200 mm. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

Signal Colour RAL  4003! The striking color "Heather Violet" of the PINK EDITION also has the advantage that the tool can easily be found on the construction site and/or work shop.

View
EcO-Bender3/200 PINK EDITION

Rol-Bender EcO-Bender3/200 PINK EDITION

bending from 0°-90°, bending height 5-200 mm

Light weighted bender, with 4 guide rollers and a removable ergonomic grip handle. Handle offers a convenient grip even when completely extended to 200 mm. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

Signal Colour RAL  4003! The striking color "Heather Violet" of the PINK EDITION also has the advantage that the tool can easily be found on the construction site and/or work shop.

View
Mini-Bender 3/200

Rol-Bender Mini-Bender 3/200

bending from 0°-90°, bending height 5-200 mm

Light weighted bender, with 2 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark. With only 2 guide rollers the Mini-Bender has a lot more curve mobility than his bigger brother the EcO-Bender 3.

View
SD5-1

Metal Shear SD5-1

up to 1.0 mm steel

The SD5-1 is a very manoeuvrable shear and can make short turns (smallest inner radius 50 mm).
This is therefore the ideal shear for zinc processors, interior construction, body shops, garage companies and damage repair!

View
EcO-Bender 4/200 PINK EDITION

Rol-Bender EcO-Bender 4/200 PINK EDITION

bending from 0°-100°, bending height 5-200 mm

Light weighted bender, with 4 guide rollers and a removable ergonomic grip handle. Handle offers a convenient grip even when completely extended to 200 mm. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

Signal Colour RAL  4003! The striking color "Heather Violet" of the PINK EDITION also has the advantage that the tool can easily be found on the construction site and/or work shop.

View
Panel Beader PB 200V

Rol-Beader Panel Beader PB 200V

Mobile Beading tool for Standing Seam Panels and sheets up to 38 mm profiling height. 

Ideal for off setting standing seam panels for clip relief clips.

View
Mini-Bender 3/200

Rol-Bender Mini-Bender 3/200

bending from 0°-90°, bending height 5-200 mm

Light weighted bender, with 2 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark. With only 2 guide rollers the Mini-Bender has a lot more curve mobility than his bigger brother the EcO-Bender 3.

View
EcO-Bender 3/350 & Disc-Bender DB 41

Rolbender SET 2S3: EcO-Bender 3/350 & Disc-Bender DB 41

A handy set for bending up to 90º (with EcO-Bender 3/350) till 350 mm and after that bending it up to even 180º (with Disc-Bender DB 41).

This set contains:

  • EcO-Bender 3/350
  • Disc-Bender DB 41
  • Tin Man's gloves Perfect Fit
  • Roll-up tape measure 5 m
  • Tin man´s pencil
  • in a practical transport box

View
EcO-Bender3/200 with O-Grip

Rol-Bender EcO-Bender3/200 with O-Grip

bending from 0°-90°, bending height 5-200 mm

Light weighted bender, with 4 guide rollers and a removable ergonomic grip handle. Handle offers a convenient grip even when completely extended to 200 mm. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

View
EcO-Bender 3/200 & Disc-Bender DB 41 S2

Rolbender SET 2S2: EcO-Bender 3/200 & Disc-Bender DB 41 S2

A handy set for bending up to 90º (with EcO-Bender 3/200) and after that bending it up to even 180º (with Disc-Bender DB 41 S2).

This set contains:

  • EcO-Bender 3/200
  • Disc-Bender DB 41 S2
  • Tin Man's gloves Perfect Fit
  • Roll-up tape measure 5 m
  • Tin man´s pencil
  • in a practical transport box

View
EcO-Bender3/350 with O-grip

Rol-Bender EcO-Bender3/350 with O-grip

bending from 0°-90°, bending height 5-350 mm

Light weighted bender, with 4 guide rollers and a removable ergonomic grip handle. Handle offers a convenient grip even when completely extended to 350 mm. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

View
3514-2

Seam Metal Shear 3514-2

up to 2.0 mm, or 4x0.9 mm steel, or 6x0.75 mm light metal

Cold cutting without flying sparks!

This shear is ideal for cutting spiral ducts, roof seams, cross seams, ridge seams and folds of sheet iron, aluminum, lead, copper, zinc or stainless steel. Cuts roller shutter boxes, cover caps, grids and wire in cage- and aviary construction (flush-edged!).

View
EcO-Bender3/200 S1

Rol-Bender EcO-Bender3/200 S1

bending from 0°-90°, bending height 5-200 mm

Light weighted bender, with 4 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

View
EcO-Bender 3/200 & Disc-Bender DB41S2 & BKK50

Rolbender SET 4: EcO-Bender 3/200 & Disc-Bender DB41S2 & BKK50

A handy set for bending up to 90º (with EcO-Bender 3/200) till 200 mm and after that bending it up to even 180º (with Disc-Bender DB 41 S2). Flange- and curve bender BKK 50 with max. bending height 50 mm (2 inches) is needed for curved work pieces and tight radii.

This set contains:

  • EcO-Bender 3/200
  • Disc-Bender DB 41 S2
  • Flange- and curve bender BKK 50
  • Tin Man's gloves Perfect Fit
  • Roll-up tape measure 5 m
  • Tin man´s pencil
  • in a practical transport box

View
EcO-Bender3/350 S1

Rol-Bender EcO-Bender3/350 S1

bending from 0°-90°, bending height 5-350 mm

Light weighted bender, with 4 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

View
EcO-Bender 3/200 & Disc-Bender DB41 & BKK50

Rolbender SET 5: EcO-Bender 3/200 & Disc-Bender DB41 & BKK50

A handy set for bending up to 90º (with EcO-Bender 3/200) till 200 mm and after that bending it up to even 180º (with Disc-Bender DB 41). Flange- and curve bender BKK 50 with max. bending height 50 mm (2 inches) is needed for curved work pieces and tight radii.

This set contains:

  • EcO-Bender 3/200
  • Disc-Bender DB 41
  • Flange- and curve bender BKK 50
  • Tin Man's gloves Perfect Fit
  • Roll-up tape measure 5 m
  • Tin man´s pencil
  • in a practical transport box

View
EcO-Bender4/200

Rol-Bender up to 100º EcO-Bender4/200

bending from 0°-100°, bending height 5-200 mm

Light weighted bender, with 4 guide rollers and a removable ergonomic grip handle. Handle offers a convenient grip even when completely extended to 200 mm. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

View
EcO-Bender 4/200 & Disc-Bender DB41S2 & BKK50

Rolbender SET 6: EcO-Bender 4/200 & Disc-Bender DB41S2 & BKK50

A handy set for bending up to 100º (with EcO-Bender 4/200) till 200 mm and after that bending it up to even 180º (with Disc-Bender DB 41 S2). Flange- and curve bender BKK 50 with max. bending height 50 mm (2 inches) is needed for curved work pieces and tight radii.

This set contains:

  • EcO-Bender 4/200
  • Disc-Bender DB 41 S2
  • Flange- and curve bender BKK 50
  • Tin Man's gloves Perfect Fit
  • Roll-up tape measure 5 m
  • Tin man´s pencil
  • in a practical transport box

View
EcO-Bender4/350

Rol-Bender up to 100º EcO-Bender4/350

bending from 0°-100°, bending height 5-350 mm

Light weighted bender, with 4 guide rollers and a removable ergonomic grip handle. Handle offers a convenient grip even when completely extended to 350 mm. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

View
Duo-Mini-Bender 3/200 & Duo-Disc-Bender DB 42 SET

Rolbender SET 8: Duo-Mini-Bender 3/200 & Duo-Disc-Bender DB 42 SET

A handy set for bending up to 90º (with Duo-Mini-Bender 3/200) and after that bending it up to even 180º (with Duo-Disc-Bender DB 42).

This set contains:

  • Duo-mini-Bender 3/200
  • Duo-Disc-Bender DB 42
  • in a practical transport box

View
EcO-Bender4/200 without handle

Rol-Bender up to 100º EcO-Bender4/200 without handle

bending from 0°-100°, bending height 5-200 mm

Light weighted bender, with 4 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

View
Panel Beader PB 200F

Rol-Beader Panel Beader PB 200F

Mobile Beading tool for Standing Seam Panels and sheets up to 38 mm profiling height. Generates flat beads (20 mm).

View
EcO-Bender4/350 without handle

Rol-Bender up to 100º EcO-Bender4/350 without handle

bending from 0°-100°, bending height 5-350 mm

Light weighted bender, with 4 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

View
Panel Beader PB 200R

Rol-Beader Panel Beader PB 200R

Mobile Beading tool for Standing Seam Panels and sheets up to 38 mm profiling height. Generates round beads (6 mm).

View
Mini-Bender 3/200

Rol-Bender Mini-Bender 3/200

bending from 0°-90°, bending height 5-200 mm

Light weighted bender, with 2 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark. With only 2 guide rollers the Mini-Bender has a lot more curve mobility than his bigger brother the EcO-Bender 3.

View
Multi-Bender 200 SET incl. 7 forming rollers

Multi-bender SET MB7: Multi-Bender 200 SET incl. 7 forming rollers

Universal device for beading, settling and edges, bend height 44-244 mm

Ideal device for beading sheet metal and folded or pre-profiled material with interchangeable forming rollers. Beading or offset depth (depending on the form roller type) up to approx. 3.5 mm. Side-folding guide wings for comfortable editing of straight lines and curves.

This set contains:

  • Multi-Bender MB200
  • 7 pair of chosable forming rollers
  • Handle
  • Guidance device
  • in a practical transport box

View
Mini-Bender 3/350

Rol-Bender Mini-Bender 3/350

bending from 0°-90°, bending height 5-350 mm

Light weighted bender, with 2 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark. With only 2 guide rollers the Mini-Bender has a lot more curve mobility than his bigger brother the EcO-Bender 3.

View
EcO-Bender 3/350 & Disc-Bender DB 41 S2

Rolbender SET 7: EcO-Bender 3/350 & Disc-Bender DB 41 S2

A handy set for bending up to 90º (with EcO-Bender 3/350) till 350 mm and after that bending it up to even 180º (with Disc-Bender DB 41 S2).

This set contains:

  • EcO-Bender 3/350
  • Disc-Bender DB 41 S2
  • Tin Man's gloves Perfect Fit
  • Roll-up tape measure 5 m
  • Tin man´s pencil
  • in a practical transport box

View
Duo-VARIO-Bender DVB200

Rol-Bender Duo-VARIO-Bender DVB200

bending from 0°-90°, bending height 5-200 mm

Everyone knows this. You want to put material that is a bit thicker and it is not possible because the material does not fit between the rollers. You and the bender are strong enough, but the material just does not fit. That is past tense. Now there is the new Duo-VARIO bender VB200. With the infinitely adjustable top roller you will be able to bend thicker plate up to 2.0 mm light metal or even 4 mm lead.

By using an adapter two Vario-Benders are connected to a Duo-Vario-Bender DVB200. The DVB200 is extremely comfortable when working on long and straight metal sheets, but if you need to work on shorter sheets you can easily unscrew the adapter and work with two single Vario-Benders.

View
Mini-Bender 4/200

Rol-Bender Mini-Bender 4/200

bending from 0°-100°, bending height 5-200 mm

Light weighted bender, with 2 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark. With only 2 guide rollers the Mini-Bender has a lot more curve mobility than his bigger brother the EcO-Bender 4.

View
EcO-Bender3/350 S1

Rol-Bender EcO-Bender3/350 S1

bending from 0°-90°, bending height 5-350 mm

Light weighted bender, with 4 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

View
Mini-Bender 4/350

Rol-Bender Mini-Bender 4/350

bending from 0°-100°, bending height 5-350 mm

Light weighted bender, with 2 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark. With only 2 guide rollers the Mini-Bender has a lot more curve mobility than his bigger brother the EcO-Bender 4.

View
Supra Bender SB 200 with handle

Rol-Bender Supra Bender SB 200 with handle

bending from 0°-120°, bending height 30-200 mm

Enables overstretching to compensate for spring back of e.g. stainless steel. Fabrication of drip edges, windowsills, eaves cladding, valley construction and many more. Light weighted bender, with 4 guide rollers and a removable ergonomic grip handle. Handle offers a convenient grip even when completely extended to 200 mm. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

View
Supra Bender SB 200 without handle

Rol-Bender Supra Bender SB 200 without handle

bending from 0°-120°, bending height 30-200 mm

Enables overstretching to compensate for spring back of e.g. stainless steel. Fabrication of drip edges, windowsills, eaves cladding, valley construction and many more. Light weighted bender, with 4 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

View
1213-1

Corrugated-electric Nibbler 1213-1

up to 1.3 mm steel

Crosswise and angle utting of corrugated, trapezoidal and square sheet profiles up to 85 mm profile heights.

View
Supra Bender SB 200 without handle

Rol-Bender Supra Bender SB 200 without handle

bending from 0°-120°, bending height 30-200 mm

Enables overstretching to compensate for spring back of e.g. stainless steel. Fabrication of drip edges, windowsills, eaves cladding, valley construction and many more. Light weighted bender, with 4 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

View
Supra-Bender SB 350 without handle

Rol-Bender Supra-Bender SB 350 without handle

bending from 0°-120°, bending height 30-350 mm

Enables overstretching to compensate for spring back of e.g. stainless steel. Fabrication of drip edges, windowsills, eaves cladding, valley construction and many more. Light weighted bender, with 4 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

View
1216-1

Corrugated-electric Nibbler 1216-1

up to 1.6 mm steel

Flexible nibbler for sheet metals, trapezoidal sheet metals, corrugated sheet metals and profiles up to 85 mm profile heights.

View
EcO-Bender4/350

Rol-Bender up to 100º EcO-Bender4/350

bending from 0°-100°, bending height 5-350 mm

Light weighted bender, with 4 guide rollers and a removable ergonomic grip handle. Handle offers a convenient grip even when completely extended to 350 mm. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

View
Supra-Bender SB 350 with handle

Rol-Bender Supra-Bender SB 350 with handle

bending from 0°-120°, bending height 30-350 mm

Enables overstretching to compensate for spring back of e.g. stainless steel. Fabrication of drip edges, windowsills, eaves cladding, valley construction and many more. Light weighted bender, with 4 guide rollers and a removable ergonomic grip handle. Handle offers a convenient grip even when completely extended to 350 mm. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

View
EcO-Bender4/200 without handle

Rol-Bender up to 100º EcO-Bender4/200 without handle

bending from 0°-100°, bending height 5-200 mm

Light weighted bender, with 4 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

View
Supra-Bender SB 350 without handle

Rol-Bender Supra-Bender SB 350 without handle

bending from 0°-120°, bending height 30-350 mm

Enables overstretching to compensate for spring back of e.g. stainless steel. Fabrication of drip edges, windowsills, eaves cladding, valley construction and many more. Light weighted bender, with 4 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

View
EcO-Bender4/350 without handle

Rol-Bender up to 100º EcO-Bender4/350 without handle

bending from 0°-100°, bending height 5-350 mm

Light weighted bender, with 4 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

View
VARIO-Bender VB200

Rol-Bender VARIO-Bender VB200

bending from 0°-90°, bending height 5-200 mm + variable thickiness!

Everybody knows this: You want to bend metal a bit thicker than usually, but there is no space between the forming rollers. You and the bender are strong enough, but there is simply no space for your metal. This is over. Now there is the new VARIO Bender VB200. 

View
Duo-VARIO-Bender DVB200

Rol-Bender Duo-VARIO-Bender DVB200

bending from 0°-90°, bending height 5-200 mm

Everyone knows this. You want to put material that is a bit thicker and it is not possible because the material does not fit between the rollers. You and the bender are strong enough, but the material just does not fit. That is past tense. Now there is the new Duo-VARIO bender VB200. With the infinitely adjustable top roller you will be able to bend thicker plate up to 2.0 mm light metal or even 4 mm lead.

By using an adapter two Vario-Benders are connected to a Duo-Vario-Bender DVB200. The DVB200 is extremely comfortable when working on long and straight metal sheets, but if you need to work on shorter sheets you can easily unscrew the adapter and work with two single Vario-Benders.

View
Mini-Bender 4/200

Rol-Bender Mini-Bender 4/200

bending from 0°-100°, bending height 5-200 mm

Light weighted bender, with 2 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark. With only 2 guide rollers the Mini-Bender has a lot more curve mobility than his bigger brother the EcO-Bender 4.

View
Flange- & Curve Bender BKK 25

Rol-Bender Flange- & Curve Bender BKK 25

bending from 0°-90°, bending height 5-25 mm

When standard benders give up the handy little flange- and curve bender BKK 25 is needed. Ideal for curved work pieces and tight radii.

View
Flange- and Curve Bender BKK 50 S2

Rol-Bender Flange- and Curve Bender BKK 50 S2

bending from 0°-90°, bending height 5-50 mm

When standard benders give up the handy little flange- and curve bender BKK 50 is needed. Ideal for curved work pieces, tight radii and even standing seam profiles.

View
Flange- & Curve Bender BKK 25 PINK EDITION

Rol-Bender Flange- & Curve Bender BKK 25 PINK EDITION

bending from 0°-90°, bending height 5-25 mm

When standard benders give up the handy little flange- and curve bender BKK 25 is needed. Ideal for curved work pieces and tight radii.

Signal Colour RAL  4003! The striking color "Heather Violet" of the PINK EDITION also has the advantage that the tool can easily be found on the construction site and/or work shop. 

View
Mini-Bender 4/350

Rol-Bender Mini-Bender 4/350

bending from 0°-100°, bending height 5-350 mm

Light weighted bender, with 2 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark. With only 2 guide rollers the Mini-Bender has a lot more curve mobility than his bigger brother the EcO-Bender 4.

View
Duo-Mini-Bender 4/200

Rol-Bender Duo-Mini-Bender 4/200

bending from 0°-100°, bending height 5-200 mm

Light weighted bender, with 4 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark. 

View
Flange- and Curve Bender BKK 50

Rol-Bender Flange- and Curve Bender BKK 50

bending from 0°-90°, bending height 5-50 mm

When standard benders give up the handy little flange- and curve bender BKK 50 is needed. Ideal for curved work pieces and tight radii.

View
Duo-Mini-Bender 4/350

Rol-Bender Duo-Mini-Bender 4/350

bending from 0°-100°, bending height 5-350 mm

Light weighted bender, with 4 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark. 

View
Flange- and Curve Bender BKK 50 S2

Rol-Bender Flange- and Curve Bender BKK 50 S2

bending from 0°-90°, bending height 5-50 mm

When standard benders give up the handy little flange- and curve bender BKK 50 is needed. Ideal for curved work pieces, tight radii and even standing seam profiles.

View
19/3514-2

Pneumatic Seam Metal Shears 19/3514-2

up to 2.0 mm steel

Ideal for cutting materials with thickened areas, seamed roofing membranes, spiral- and seam-folded tubes (even over the 4-fold seam), mesh, barrels, aluminum tear plate, sheet, stainless steel, Inox, aluminum, copper, zinc, U-shaped, C-,O- and L-profiles etc.

View
Duo-EcO-Bender 4/200

Rol-Bender Duo-EcO-Bender 4/200

bending from 0°-100°, bending height 5-200 mm

With 8 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark. 

View
Duo-Mini-Bender 3/200

Rol-Bender Duo-Mini-Bender 3/200

bending from 0°-90°, bending height 5-200 mm

Light weighted bender, with 4 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark. 

View
Duo-EcO-Bender 4/350

Rol-Bender Duo-EcO-Bender 4/350

bending from 0°-100°, bending height 5-350 mm

With 8 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark. 

View
Duo-Mini-Bender 4/200

Rol-Bender Duo-Mini-Bender 4/200

bending from 0°-100°, bending height 5-200 mm

Light weighted bender, with 4 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark. 

View
Duo-EcO-Bender 3/350

Rol-Bender Duo-EcO-Bender 3/350

bending from 0°-90°, bending height 5-350 mm

With 8 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark. 

View
Duo-Mini-Bender 3/350

Rol-Bender Duo-Mini-Bender 3/350

bending from 0°-90°, bending height 5-350 mm

Light weighted bender, with 4 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark. 

View
AK 3010 Ni-MH

Cordless Metal Shear AK 3010 Ni-MH

up to 1.0 mm sheet metal

Agile shear, handy for tight radii (50 mm) and therefore ideal for roof plumbers, interior fittings (for example, ceiling construction - installation of spots) and motor vehicle workshops (for example, when installing sun roofs).

5-piece 12 volt professional set AK 3010 Ni-MH consists of:
1 cordless shear AK 3010,
2 batteries MXL12,
1 charger RC and
1 transportbox.

View
Duo-EcO-Bender 3/200

Rol-Bender Duo-EcO-Bender 3/200

bending from 0°-90°, bending height 5-200 mm

With 8 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark. 

View
Duo-Mini-Bender 4/350

Rol-Bender Duo-Mini-Bender 4/350

bending from 0°-100°, bending height 5-350 mm

Light weighted bender, with 4 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark. 

View
Duo-Mini-Bender 3/350

Rol-Bender Duo-Mini-Bender 3/350

bending from 0°-90°, bending height 5-350 mm

Light weighted bender, with 4 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark. 

View
Duo-Mono-Bender 3/200

Rol-Bender Duo-Mono-Bender 3/200

bending from 0°-90°, bending height 5-200 mm

Light weighted bender, with 4 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

View
Duo-Mono-Bender 4/200

Rol-Bender up to tot 100° Duo-Mono-Bender 4/200

bending from 0°-100°, bending height 5-200 mm

Light weighted bender, with 4 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

View
Duo-Mono-Bender 4/350

Rol-Bender up 100° Duo-Mono-Bender 4/350

bending from 0°-100°, bending height 5-350 mm

Light weighted bender, with 4 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

View
Duo-Mono-Bender 3/350

Rol-Bender Duo-Mono-Bender 3/350

bending from 0°-90°, bending height 5-350 mm

Light weighted bender, with 4 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

View
Duo-Mono-Bender 4/200

Rol-Bender up to tot 100° Duo-Mono-Bender 4/200

bending from 0°-100°, bending height 5-200 mm

Light weighted bender, with 4 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

View
Duo-Mono-Bender 3/350

Rol-Bender Duo-Mono-Bender 3/350

bending from 0°-90°, bending height 5-350 mm

Light weighted bender, with 4 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

View
Duo-Mono-Bender 4/350

Rol-Bender up 100° Duo-Mono-Bender 4/350

bending from 0°-100°, bending height 5-350 mm

Light weighted bender, with 4 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

View
AK 3514-2 Ni-MH

Cordless Seam Metal Shear AK 3514-2 Ni-MH

up to 2.0 mm, or 4x0.9 mm steel, or 6x0.75 mm light metal

Cold cutting without flying sparks! Cutting of 6x-folded seams!!

This shear is ideal for cutting spiral ducts, roof seams, cross seams, ridge seams and folds of sheet iron, aluminum, lead, copper, zinc or stainless steel. Cuts roller shutter boxes, cover caps, grids and wire in cage- and aviary construction (flush-edged!).

5-piece 12 volt professional set AK 3514-2 Ni-MH consists of:
1 cordless shear AK 3514-2,
2 batteries MXL12,
1 charger RC and
1 transportbox.

View
Duo-EcO-Bender 3/200

Rol-Bender Duo-EcO-Bender 3/200

bending from 0°-90°, bending height 5-200 mm

With 8 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark. 

View
SET 3/4003: EcO-Bender & Disc-Bender & BKK 25 PINK EDITION

Rolbender SET 3/4003: EcO-Bender & Disc-Bender & BKK 25 PINK EDITION

A handy set for bending straight and curved metal up to 90º (with EcO-Bender 3/200 & BKK 25) and after that bending it up to even 180º (with Disc-Bender DB 41).

This set contains:

  • EcO-Bender 3/200
  • Disc-Bender DB 41
  • Flange- & Curve Bender BKK 25
  • Tin Man's gloves Perfect Fit
  • Roll-up tape measure 5 m
  • Tin man´s pencil
  • in a practical transport box

Signal Colour RAL  4003! "Heather Violet". The striking color of the PINK EDITION also has the advantage that the tool can easily be found on the construction site and/or work shop. 

View
Duo-EcO-Bender 3/350

Rol-Bender Duo-EcO-Bender 3/350

bending from 0°-90°, bending height 5-350 mm

With 8 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark. 

View
Duo-Mono-Bender 3/200

Rol-Bender Duo-Mono-Bender 3/200

bending from 0°-90°, bending height 5-200 mm

Light weighted bender, with 4 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

View
Duo-EcO-Bender 4/200

Rol-Bender Duo-EcO-Bender 4/200

bending from 0°-100°, bending height 5-200 mm

With 8 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark. 

View
EcO-Bender3/200 PINK EDITION

Rol-Bender EcO-Bender3/200 PINK EDITION

bending from 0°-90°, bending height 5-200 mm

Light weighted bender, with 4 guide rollers and a removable ergonomic grip handle. Handle offers a convenient grip even when completely extended to 200 mm. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

Signal Colour RAL  4003! The striking color "Heather Violet" of the PINK EDITION also has the advantage that the tool can easily be found on the construction site and/or work shop.

View
Duo-EcO-Bender 4/350

Rol-Bender Duo-EcO-Bender 4/350

bending from 0°-100°, bending height 5-350 mm

With 8 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark. 

View
Flange- & Curve Bender BKK 25 PINK EDITION

Rol-Bender Flange- & Curve Bender BKK 25 PINK EDITION

bending from 0°-90°, bending height 5-25 mm

When standard benders give up the handy little flange- and curve bender BKK 25 is needed. Ideal for curved work pieces and tight radii.

Signal Colour RAL  4003! The striking color "Heather Violet" of the PINK EDITION also has the advantage that the tool can easily be found on the construction site and/or work shop. 

View
Disc Bender DB 41 (single)

Rol-Bender Disc Bender DB 41 (single)

bending from 90°-180°, bending height 8-40 mm

With the disc-bender you can bend a right angle of 90° to 180°. Perfect for eaves, hems, cross seams and flashings.

View
Disc Bender DB 41 (single) PINK EDITION

Rol-Bender Disc Bender DB 41 (single) PINK EDITION

bending from 90°-180°, bending height 8-40 mm

With the disc-bender you can bend a right angle of 90° to 180°. Perfect for eaves, hems, cross seams and flashings.

Signal Colour RAL  4003! The striking color "Heather Violet" of the PINK EDITION also has the advantage that the tool can easily be found on the construction site and/or work shop. 

View
Disc Bender DB 41 (single) PINK EDITION

Rol-Bender Disc Bender DB 41 (single) PINK EDITION

bending from 90°-180°, bending height 8-40 mm

With the disc-bender you can bend a right angle of 90° to 180°. Perfect for eaves, hems, cross seams and flashings.

Signal Colour RAL  4003! The striking color "Heather Violet" of the PINK EDITION also has the advantage that the tool can easily be found on the construction site and/or work shop. 

View
K9-1-WAD

Automatic Power Seamer K9-1-WAD

Model for electric closing of the double seam, for profile heights of 25 - 60 mm

Model K9-1-WAD includes the set of forming rolls for single seam (K9-1-WR), set of cutting rolls (K9-1-AR), the dual-safety-switch (K9-1-DF).

The K9-1-WAD closes sheet metal, aluminum, zinc and copper up to 0.8 mm and stainless steel up to 0.5 mm.

View
Disc-Bender DB41S2 (single)

Rol-Bender Disc-Bender DB41S2 (single)

bending from 90°-180°, bending height 8-40 mm

With the disc-bender you can bend a right angle of 90° to 180°. Perfect for eaves, hems, cross seams and flashings.
DB41S2 designed with swiveling guide roller for placing the tool easily in work pieces that are difficult to access.

View
K9-1

Automatic Power Seamer K9-1

Basic model for electric closing of the double seam, for profile heights of 25 - 60 mm

The K9-1 closes sheet metal, aluminum, zinc and copper up to 0.8 mm and stainless steel up to 0.5 mm.

View
Duo Disc Bender Combi DB42 (double)

Rol-Bender Duo Disc Bender Combi DB42 (double)

bending from 90°-180°, bending height 8-40 mm

With the disc-bender you can bend a right angle of 90° to 180°. Perfect for eaves, hems, cross seams and flashings. The double disc-bender is ideal for long workpieces. Composed of 2 single Disc Benders DB41 and adapter.

View
K9-1-ERB

Power Seamer K9-1-ERB

Model for electric closing of round profiles, for profile heights of 48 - 65 mm

Increasingly Tinsmith specialized companies, engage themselves with the assembling of self-feeding Roof Profile Panels. Especially to close the seam of industrial manufactured profiles, DRÄCO developed a multilaterally, usable Power Seamer K9-1 ERB. The machine can close straight, tapered, convex or concave Profiles of many manufacturers. The seamer has an ingenious pressure adjustment. The pressure can be adjusted variable, to achieve an optimum closed seam.

View
AK 3010 Li-Ion

Cordless metal shear 5-pcs.- professional AK 3010 Li-Ion

up to 1.0 mm steel

The AK 3010 Li-Ion is a very manoeuvrable shear and can make short turns (smallest inner radius 50 mm).
This is therefore the ideal shear for zinc processors, interior construction, body shops, garage companies and damage repair!

5-piece 18 volt professional set AK 3010 Li-Ion consists of:
1 cordless shear AK 3010 Li-Ion, 
2 batteries (2.0 Ah + 4.0 Ah),
1 charger CLi (30 Min.)
1 transport box.

View
Duo Disc Bender Combi DB42-1S2 (double)

Rol-Bender Duo Disc Bender Combi DB42-1S2 (double)

bending from 90°-180°, bending height 8-40 mm

With the double disc-bender you can bend a right angle of 90° to 180°. Perfect for eaves, hems, cross seams and flashings. The double disc-bender is ideal for long workpieces. Composed of two Single Disc Benders DB41S2 with swiveling guide roller and adapter.

View
K9-1-GWS

Automatic Power Seamer for single seam K9-1-GWS

2 forming station model for single lock seam, for profile heights of 25 - 60 mm

Ideal angle-seam closer for facades, round dormers and domed roofs. Minimum radius 60 cm.

View
K 7

Double Lock Hand Seamer K 7

closes the double seam up to 0.8 mm sheet metal, closing length 210 mm

This double lock hand tool is used after the single lock is closed. Ideal for starting and ending or continuous double lock seaming

 

View
Multi-Bender 200

Rol-Bender Multi-Bender 200

Universal device for beading, settling and edges, bend height 44-244 mm

Ideal device for beading sheet metal and folded or pre-profiled material with interchangeable forming rollers. Beading or offset depth (depending on the form roller type) up to approx. 3.5 mm. Side-folding guide wings for comfortable editing of straight lines and curves.

View
K 8

Single Lock Hand Seamer K 8

closes the single seam up to 0.8 mm sheet metal, closing length 210 mm

Ideal for starting seam, for short facades and areas with difficult access or an entire roof or wall.

 

View
Panel Beader PB 200F

Rol-Beader Panel Beader PB 200F

Mobile Beading tool for Standing Seam Panels and sheets up to 38 mm profiling height. Generates flat beads (20 mm).

View
AK 3514-2 Li-Ion

Cordless Seam Metal Shear 5-pcs.-professional AK 3514-2 Li-Ion

up to 2.0 mm, or 4x0.9 mm steel, or 6x0.75 mm light metal

Cold cutting without flying sparks!

This shear is ideal for cutting spiral ducts, roof seams, cross seams, ridge seams and folds of sheet iron, aluminum, lead, copper, zinc or stainless steel. Cuts roller shutter boxes, cover caps, grids and wire in cage- and aviary construction (flush-edged!).

5-piece 18 volt professional set AK 3514-2 Li-Ion consists of:
1 cordless shear AK 3514-2 Li-Ion, 
2 batteries (2.0 Ah + 4.0 Ah),
1 charger CLi (30 Min.),
1 transport box.

View
K8S1

Hand seamer with angle-adjustable lever K8S1

closes the single seam up to 0.8 mm sheet metal, closing length 210 mm

Have you always been annoyed when the angeled roof on the facade gets in the way, or you bump into a wall while trying to close the seam? The solution is now available, the new K8 with swiveling lever.

If you already own a K8, you can retrofit it by exchanging the lever.

 

View
Panel Beader PB 200R

Rol-Beader Panel Beader PB 200R

Mobile Beading tool for Standing Seam Panels and sheets up to 38 mm profiling height. Generates round beads (6 mm).

View
AK 3514-7R Li-Ion

Cordless Radius Seam Metal Shear AK 3514-7R Li-Ion

up to 2.0 mm, or 4x0.75 mm steel

Cold cutting without flying sparks! Ideal for cutting recesses in spiral ducts and sheets of all kinds. Cuts straight and tight radii (min. 45 mm ø) in sheets and even over seams.

Ideal for air and climate technology, installation companies, truck workshops, metalworking companies etc.

5-piece 18 volt professional set AK 3514-7R Li-Ion consists of:
1 cordless shear AK 3514-7R Li-Ion, 
2 batteries (2.0 Ah + 4.0 Ah),
1 charger CLi (30 Min.),
1 transport box.

View
K8N

Single Lock Hand Seamer K8N

closes the single seam up to 0.8 mm sheet metal, closing length 200 mm

A unique design for closing a single lock seam. This standard tool can be delivered in different lengths.

 

View
Panel Beader PB 200V

Rol-Beader Panel Beader PB 200V

Mobile Beading tool for Standing Seam Panels and sheets up to 38 mm profiling height. 

Ideal for off setting standing seam panels for clip relief clips.

View
K8NL

Single Lock Hand Seamer extra long K8NL

XL version, closes the single seam up to 0.8 mm sheet metal, closing length 350 mm

A unique design for closing a single lock seam. This standard tool can be delivered in different lengths.

 

View
EcO-Bender & Disc-Bender SET

Rolbender SET 2: EcO-Bender & Disc-Bender SET

A handy set for bending up to 90º (with EcO-Bender 3/200) and after that bending it up to even 180º (with Disc-Bender DB 41).

This set contains:

  • EcO-Bender 3/200
  • Disc-Bender DB 41
  • Tin Man's gloves Perfect Fit
  • Roll-up tape measure 5 m
  • Tin man´s pencil
  • in a practical transport box

View
K 5

Single Lock Hand Seamer for Arches K 5

fast closing of profiled panels for arches, domes, dormers and barrel vaulted roofs up to 0,8 mm sheet metal, closing length 70 mm

 

View
SET 3: EcO-Bender & Disc-Bender & BKK 25

Rolbender SET 3: EcO-Bender & Disc-Bender & BKK 25

A handy set for bending straight and curved metal up to 90º (with EcO-Bender 3/200 & BKK 25) and after that bending it up to even 180º (with Disc-Bender DB 41).

This set contains:

  • EcO-Bender 3/200
  • Disc-Bender DB 41
  • Flange- & Curve Bender BKK 25
  • Tin Man's gloves Perfect Fit
  • Roll-up tape measure 5 m
  • Tin man´s pencil
  • in a practical transport box

View
K 6-1

Batten Hand Seamer K 6-1

Handseamer for Batten Seams T-caps from 45 to 65 mm

Batten cap systems not only contribute to the architectural design of the roof but are highly functional and one of the oldest roofing systems still in use.

View
EcO-Bender 3/200 & Disc-Bender DB 41 S2

Rolbender SET 2S2: EcO-Bender 3/200 & Disc-Bender DB 41 S2

A handy set for bending up to 90º (with EcO-Bender 3/200) and after that bending it up to even 180º (with Disc-Bender DB 41 S2).

This set contains:

  • EcO-Bender 3/200
  • Disc-Bender DB 41 S2
  • Tin Man's gloves Perfect Fit
  • Roll-up tape measure 5 m
  • Tin man´s pencil
  • in a practical transport box

View
K 6-2

Hand Seamer for German Batten Seam K 6-2

Handseamer for Batten Seams T-caps from 45 to 145 mm

Batten cap systems not only contribute to the architectural design of the roof but are highly functional and one of the oldest roofing systems still in use.

View
EcO-Bender 3/350 & Disc-Bender DB 41

Rolbender SET 2S3: EcO-Bender 3/350 & Disc-Bender DB 41

A handy set for bending up to 90º (with EcO-Bender 3/350) till 350 mm and after that bending it up to even 180º (with Disc-Bender DB 41).

This set contains:

  • EcO-Bender 3/350
  • Disc-Bender DB 41
  • Tin Man's gloves Perfect Fit
  • Roll-up tape measure 5 m
  • Tin man´s pencil
  • in a practical transport box

View
K 11

Drip Edge Bender K 11

to make a clean bend at drip edges without leaving marks

bends from 0° to more than 90° because of its wide opening

closing length 250 mm
weight 1,7 kg

View
SET 3/4003: EcO-Bender & Disc-Bender & BKK 25 PINK EDITION

Rolbender SET 3/4003: EcO-Bender & Disc-Bender & BKK 25 PINK EDITION

A handy set for bending straight and curved metal up to 90º (with EcO-Bender 3/200 & BKK 25) and after that bending it up to even 180º (with Disc-Bender DB 41).

This set contains:

  • EcO-Bender 3/200
  • Disc-Bender DB 41
  • Flange- & Curve Bender BKK 25
  • Tin Man's gloves Perfect Fit
  • Roll-up tape measure 5 m
  • Tin man´s pencil
  • in a practical transport box

Signal Colour RAL  4003! "Heather Violet". The striking color of the PINK EDITION also has the advantage that the tool can easily be found on the construction site and/or work shop. 

View
K 12

Drip Edge Seamer K 12

follow up tool to the drip edge bender

permits a clean and fast locking of the drip edge

closing length 200 mm
weight 2 kg

View
EcO-Bender 3/200 & Disc-Bender DB41S2 & BKK50

Rolbender SET 4: EcO-Bender 3/200 & Disc-Bender DB41S2 & BKK50

A handy set for bending up to 90º (with EcO-Bender 3/200) till 200 mm and after that bending it up to even 180º (with Disc-Bender DB 41 S2). Flange- and curve bender BKK 50 with max. bending height 50 mm (2 inches) is needed for curved work pieces and tight radii.

This set contains:

  • EcO-Bender 3/200
  • Disc-Bender DB 41 S2
  • Flange- and curve bender BKK 50
  • Tin Man's gloves Perfect Fit
  • Roll-up tape measure 5 m
  • Tin man´s pencil
  • in a practical transport box

View
K1-CW/100

Decoiler K1-CW/100

mobile, with 5-armed reel, incl. 2 swivel castors and 2 fixed castors

Width coil car = 1000 mm
Recommended coil width = up to 800 mm
Carrying capacity up to max. 2000 kg

View
EcO-Bender 3/200 & Disc-Bender DB41 & BKK50

Rolbender SET 5: EcO-Bender 3/200 & Disc-Bender DB41 & BKK50

A handy set for bending up to 90º (with EcO-Bender 3/200) till 200 mm and after that bending it up to even 180º (with Disc-Bender DB 41). Flange- and curve bender BKK 50 with max. bending height 50 mm (2 inches) is needed for curved work pieces and tight radii.

This set contains:

  • EcO-Bender 3/200
  • Disc-Bender DB 41
  • Flange- and curve bender BKK 50
  • Tin Man's gloves Perfect Fit
  • Roll-up tape measure 5 m
  • Tin man´s pencil
  • in a practical transport box

View
K1-CW/125

Decoiler K1-CW/125

mobile, with 5-armed reel, incl. 2 swivel castors and 2 fixed castors

Width coil car = 1250 mm
Recommended coil width = up to 1000 mm
Carrying capacity up to max. 1500 kg

View
EcO-Bender 4/200 & Disc-Bender DB41S2 & BKK50

Rolbender SET 6: EcO-Bender 4/200 & Disc-Bender DB41S2 & BKK50

A handy set for bending up to 100º (with EcO-Bender 4/200) till 200 mm and after that bending it up to even 180º (with Disc-Bender DB 41 S2). Flange- and curve bender BKK 50 with max. bending height 50 mm (2 inches) is needed for curved work pieces and tight radii.

This set contains:

  • EcO-Bender 4/200
  • Disc-Bender DB 41 S2
  • Flange- and curve bender BKK 50
  • Tin Man's gloves Perfect Fit
  • Roll-up tape measure 5 m
  • Tin man´s pencil
  • in a practical transport box

View
K1-CW/150

mobile Decoiler K1-CW/150

mobile, with 5-armed reel, incl. 2 swivel castors and 2 fixed castors

Width coil car = 1500 mm
Recommended coil width = up to 1250 mm
Carrying capacity up to max. 1500 kg

View
EcO-Bender 3/350 & Disc-Bender DB 41 S2

Rolbender SET 7: EcO-Bender 3/350 & Disc-Bender DB 41 S2

A handy set for bending up to 90º (with EcO-Bender 3/350) till 350 mm and after that bending it up to even 180º (with Disc-Bender DB 41 S2).

This set contains:

  • EcO-Bender 3/350
  • Disc-Bender DB 41 S2
  • Tin Man's gloves Perfect Fit
  • Roll-up tape measure 5 m
  • Tin man´s pencil
  • in a practical transport box

View
K1-CW/100AQ

Decoiler with Cross Cut Attachment K1-CW/100AQ

mobile, with 5-armed reel, incl. 2 swivel castors and 2 fixed castors

Mobile Decoiler K1-CW/100AQ including decoiling and cross cut attachment K1-100AQ.

Width coil car = 1000 mm
Recommended coil width = up to 800 mm
Carrying capacity up to max. 2000 kg

View
Duo-Mini-Bender 3/200 & Duo-Disc-Bender DB 42 SET

Rolbender SET 8: Duo-Mini-Bender 3/200 & Duo-Disc-Bender DB 42 SET

A handy set for bending up to 90º (with Duo-Mini-Bender 3/200) and after that bending it up to even 180º (with Duo-Disc-Bender DB 42).

This set contains:

  • Duo-mini-Bender 3/200
  • Duo-Disc-Bender DB 42
  • in a practical transport box

View
K1-CW/125AQ

Decoiler with Cross Cut Attachment K1-CW/125AQ

mobile, with 5-armed reel, incl. 2 swivel castors and 2 fixed castors

Mobile Decoiler K1-CW/125AQ including decoiling and cross cut attachment K1-125AQ.

Width coil car = 1250 mm
Recommended coil width = up to 1000 mm
Carrying capacity up to max. 1500 kg

View
Multi-Bender 200 SET incl. 7 forming rollers

Multi-bender SET MB7: Multi-Bender 200 SET incl. 7 forming rollers

Universal device for beading, settling and edges, bend height 44-244 mm

Ideal device for beading sheet metal and folded or pre-profiled material with interchangeable forming rollers. Beading or offset depth (depending on the form roller type) up to approx. 3.5 mm. Side-folding guide wings for comfortable editing of straight lines and curves.

This set contains:

  • Multi-Bender MB200
  • 7 pair of chosable forming rollers
  • Handle
  • Guidance device
  • in a practical transport box

View
K1-CW/150AQ

Decoiler with Cross Cut Attachment K1-CW/150AQ

mobile, with 5-armed reel, incl. 2 swivel castors and 2 fixed castors

Mobile Decoiler K1-CW/150AQ including decoiling and cross cut attachment K1-150AQ.

Width coil car = 1500 mm
Recommended coil width = up to 1250 mm
Carrying capacity up to max. 1500 kg

View
K1-CW/100AQ/LSE/S

Decoiler with Cutting devices K1-CW/100AQ/LSE/S

mobile, with 5-armed reel, incl. 2 swivel castors and 2 fixed castors

Mobile Decoiler K1-CW/100AQ including decoiling and cross cut attachment K1-100AQ and longitudinal cutting device.

Width coil car = 1000 mm
Recommended coil width = up to 800 mm
Carrying capacity up to max. 2000 kg

View
K1-CW/125AQ/LSE/S

Decoiler with Cutting devices K1-CW/125AQ/LSE/S

mobile, with 5-armed reel, incl. 2 swivel castors and 2 fixed castors

Mobile Decoiler K1-CW/125AQ including decoiling and cross cut attachment K1-125AQ and longitudinal cutting device K1-LSE/S.

Width coil car = 1250 mm
Recommended coil width = up to 1000 mm
Carrying capacity up to max. 1500 kg

View
K1-CW/150AQ/LSE/S

Decoiler with Cutting devices K1-CW/150AQ/LSE/S

mobile, with 5-armed reel, incl. 2 swivel castors and 2 fixed castors

Mobile Decoiler K1-CW/150AQ including decoiling and cross cut attachment K1-125AQ and longitudinal cutting device K1-LSE/S.

Width coil car = 1500 mm
Recommended coil width = up to 1250 mm
Carrying capacity up to max. 1500 kg

View
K 1-CWz/100

DRÄCO Core K 1-CWz/100

fits DRÄCO decoiler K1-CW/100

View
K 1-CWz/100

DRÄCO Core K 1-CWz/100

fits DRÄCO decoiler K1-CW/125

View
K 1-CWz/150

DRÄCO Core K 1-CWz/150

View
K1-100AQ

Decoiling & Cross Cut Attachment K1-100AQ

The Slitter Attachment K1-AQ can be fitted to any DRÄCO Decoiler or can be mounted on to a workbench.

width = 1000 mm
advised coil-width = 800 mm

View
K1-125AQ

Decoiling & Cross Cut Attachment K1-125AQ

The Slitter Attachment K1-AQ can be fitted to any DRÄCO Decoiler or can be mounted on to a workbench.

width = 1250 mm
advised coil-width = 1000 mm

View
K1-150AQ

Decoiling & Cross Cut Attachment K1-150AQ

The Slitter Attachment K1-AQ can be fitted to any DRÄCO Decoiler or can be mounted on to a workbench.

width = 1500 mm
advised coil-width = 1250 mm

View
K1-LAQ

Mechanical measuring device K1-LAQ

Optional length measuring device for the decoiling and cross cut attachment AQ for the DRÄCO mobile decoilers

View
K1-LSE-1

Lengths wise device K1-LSE-1

Length cut slitter device (without shear) for the Decoiling & Cross Cutt Attachment K1-AQ

View
K1-AG100

Coil Trolley K1-AG100

easy transportation without danger of coils up to 1500 mm width

capacity = 200 kg
weight = 24 kg

View
K1-AG125

Coil Trolley K1-AG125

easy transportation without danger of coils up to 1500 mm width

capacity = 200 kg
weight = 28 kg

View
K1-AGb100

Guide for Coil Trolley K1-AGb100

coil width mm = 0 - 900
kg = 4.5

View
K1-AGb125

Guide for Coil Trolley K1-AGb125

coil width mm = bis 1150 mm
kg = 5,0

View
K1-CSg

Quick-Strap K1-CSg

No more damaged coils. The 2500 x 48 mm wide strap eliminates damage caused by wire, string, rope or tape.

Quick fastening and release using Velcro fastening and is ideal for work-shops and site- work, also for safe transporting of coils, to and from the site.

View
K1-AGNU-3

Hand Operated Detail Folding Brake K1-AGNU-3

with frame

ideal for the roof & facade industry, drip edges, transverse fences, flood defense, losange's are simple and quick to manufacture.

working width  = 1120 mm
weight  = 80 kg only

View
K1-AGN-3

Hand Operated Folding Brake K1-AGN-3

without frame, ideal for transport, for mounting on trailer or worktable.

ideal for the roof & facade industry, drip edges, transverse fences, flood defense, losange's are simple and quick to manufacture.

working width = 1120 mm
weight = 57 kg only

View
K1-AGNRS-4

Cross Cut Roll-Slitter-Shear K1-AGNRS-4

with linear guide for K1-AGN-3 and K1-AGNU-3   *NEW*

cutting length 1000 mm
weight = 5 kg


This new roller shear can be converted into a profiling head. The corresponding rollers can be used by the DRÄCO Multibender 200.

View
K10-FH-25

Fixed Clip Former K10-FH-25

Bending and punching 2 holes in one operation, height 25 mm / 1".

View
K10-FH-38

Fixed Clip Former K10-FH-38

Bending and punching 2 holes in one operation, height 38 mm / 1.5".

View
EcO-Bender4/200

Rol-Bender up to 100º EcO-Bender4/200

bending from 0°-100°, bending height 5-200 mm

Light weighted bender, with 4 guide rollers and a removable ergonomic grip handle. Handle offers a convenient grip even when completely extended to 200 mm. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

View
EcO-Bender3/200 with O-Grip

Rol-Bender EcO-Bender3/200 with O-Grip

bending from 0°-90°, bending height 5-200 mm

Light weighted bender, with 4 guide rollers and a removable ergonomic grip handle. Handle offers a convenient grip even when completely extended to 200 mm. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

View
EcO-Bender3/200 S1

Rol-Bender EcO-Bender3/200 S1

bending from 0°-90°, bending height 5-200 mm

Light weighted bender, with 4 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

View
EcO-Bender3/350 with O-grip

Rol-Bender EcO-Bender3/350 with O-grip

bending from 0°-90°, bending height 5-350 mm

Light weighted bender, with 4 guide rollers and a removable ergonomic grip handle. Handle offers a convenient grip even when completely extended to 350 mm. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

View
Mini-Bender 3/200

Rol-Bender Mini-Bender 3/200

bending from 0°-90°, bending height 5-200 mm

Light weighted bender, with 2 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark. With only 2 guide rollers the Mini-Bender has a lot more curve mobility than his bigger brother the EcO-Bender 3.

View
Mini-Bender 3/350

Rol-Bender Mini-Bender 3/350

bending from 0°-90°, bending height 5-350 mm

Light weighted bender, with 2 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark. With only 2 guide rollers the Mini-Bender has a lot more curve mobility than his bigger brother the EcO-Bender 3.

View
Supra Bender SB 200 with handle

Rol-Bender Supra Bender SB 200 with handle

bending from 0°-120°, bending height 30-200 mm

Enables overstretching to compensate for spring back of e.g. stainless steel. Fabrication of drip edges, windowsills, eaves cladding, valley construction and many more. Light weighted bender, with 4 guide rollers and a removable ergonomic grip handle. Handle offers a convenient grip even when completely extended to 200 mm. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

View
Supra-Bender SB 350 with handle

Rol-Bender Supra-Bender SB 350 with handle

bending from 0°-120°, bending height 30-350 mm

Enables overstretching to compensate for spring back of e.g. stainless steel. Fabrication of drip edges, windowsills, eaves cladding, valley construction and many more. Light weighted bender, with 4 guide rollers and a removable ergonomic grip handle. Handle offers a convenient grip even when completely extended to 350 mm. Solves many technical bending problems as up-stands and counter forms without any scratch mark.

View
VARIO-Bender VB200

Rol-Bender VARIO-Bender VB200

bending from 0°-90°, bending height 5-200 mm + variable thickiness!

Everybody knows this: You want to bend metal a bit thicker than usually, but there is no space between the forming rollers. You and the bender are strong enough, but there is simply no space for your metal. This is over. Now there is the new VARIO Bender VB200. 

View
Disc Bender DB 41 (single)

Rol-Bender Disc Bender DB 41 (single)

bending from 90°-180°, bending height 8-40 mm

With the disc-bender you can bend a right angle of 90° to 180°. Perfect for eaves, hems, cross seams and flashings.

View
Duo Disc Bender Combi DB42 (double)

Rol-Bender Duo Disc Bender Combi DB42 (double)

bending from 90°-180°, bending height 8-40 mm

With the disc-bender you can bend a right angle of 90° to 180°. Perfect for eaves, hems, cross seams and flashings. The double disc-bender is ideal for long workpieces. Composed of 2 single Disc Benders DB41 and adapter.

View
Disc-Bender DB41S2 (single)

Rol-Bender Disc-Bender DB41S2 (single)

bending from 90°-180°, bending height 8-40 mm

With the disc-bender you can bend a right angle of 90° to 180°. Perfect for eaves, hems, cross seams and flashings.
DB41S2 designed with swiveling guide roller for placing the tool easily in work pieces that are difficult to access.

View
Duo Disc Bender Combi DB42-1S2 (double)

Rol-Bender Duo Disc Bender Combi DB42-1S2 (double)

bending from 90°-180°, bending height 8-40 mm

With the double disc-bender you can bend a right angle of 90° to 180°. Perfect for eaves, hems, cross seams and flashings. The double disc-bender is ideal for long workpieces. Composed of two Single Disc Benders DB41S2 with swiveling guide roller and adapter.

View
Flange- & Curve Bender BKK 25

Rol-Bender Flange- & Curve Bender BKK 25

bending from 0°-90°, bending height 5-25 mm

When standard benders give up the handy little flange- and curve bender BKK 25 is needed. Ideal for curved work pieces and tight radii.

View
Flange- and Curve Bender BKK 50

Rol-Bender Flange- and Curve Bender BKK 50

bending from 0°-90°, bending height 5-50 mm

When standard benders give up the handy little flange- and curve bender BKK 50 is needed. Ideal for curved work pieces and tight radii.

View
Duo-Mini-Bender 3/200

Rol-Bender Duo-Mini-Bender 3/200

bending from 0°-90°, bending height 5-200 mm

Light weighted bender, with 4 guide rollers. Solves many technical bending problems as up-stands and counter forms without any scratch mark. 

View
EcO-Bender & Disc-Bender SET

Rolbender SET 2: EcO-Bender & Disc-Bender SET

A handy set for bending up to 90º (with EcO-Bender 3/200) and after that bending it up to even 180º (with Disc-Bender DB 41).

This set contains:

  • EcO-Bender 3/200
  • Disc-Bender DB 41
  • Tin Man's gloves Perfect Fit
  • Roll-up tape measure 5 m
  • Tin man´s pencil
  • in a practical transport box

View
SET 3: EcO-Bender & Disc-Bender & BKK 25

Rolbender SET 3: EcO-Bender & Disc-Bender & BKK 25

A handy set for bending straight and curved metal up to 90º (with EcO-Bender 3/200 & BKK 25) and after that bending it up to even 180º (with Disc-Bender DB 41).

This set contains:

  • EcO-Bender 3/200
  • Disc-Bender DB 41
  • Flange- & Curve Bender BKK 25
  • Tin Man's gloves Perfect Fit
  • Roll-up tape measure 5 m
  • Tin man´s pencil
  • in a practical transport box

View
Multi-Bender 200

Rol-Bender Multi-Bender 200

Universal device for beading, settling and edges, bend height 44-244 mm

Ideal device for beading sheet metal and folded or pre-profiled material with interchangeable forming rollers. Beading or offset depth (depending on the form roller type) up to approx. 3.5 mm. Side-folding guide wings for comfortable editing of straight lines and curves.

View
Beading Adapter

DRÄCO Adapter K1-AGNARS Beading Adapter

Using this adapter, the beading rollers of the DRÄCO Multi-Bender MB200 can be fitted to the DRÄCO roller shear K1-AGNU-4.

View