Refine your search result

Partitions

S1001N-1

Metal Slitting Shears S1001N-1

up to 1.3 mm steel

Ideal shears for installation companies, assembly and craft.

Cutting air ducts, sandwich board, making a cold bridge and a thousands of other applications.

 

View
1016-1

Metal Shear 1016-1

up to 1.6 mm steel

Universal powerful shear for sheet metal up to 1.6 mm and therefore particularly suitable for installation companies, assembly and craft. Ideal also in the reduction for cutting metal stud profiles.

View
1020-1

Metal Slitting Shear 1020-1

up to 2.0 mm steel

This powerful shear is ideal for cutting U-, C-, O- and L-profiles and is particularly suitable for construction companies, air duct construction, switch cabinet construction etc., so wherever a higher capacity is desirable.

View
3515

Metal Stud & Stainless Steel Shear 3515

up to 2.3 mm steel

Due to the high performance, the low-vibration and soft cut ideal for separating UA stiffening profiles (up to 2 mm steel!) and for C & CW profiles in drywall construction. Saves the dangerous work with the angle grinder. No flying sparks, making it ideal for cutting indoors.

View
3520

Profile Metal Shear 3520

up to 2.0 mm steel

The universal cutting device for the electrical installer, apparatus and control cabinet construction. The solution for cutting cable trays, cable tray lids, cable ladders, trapezoidal profile rungs, cable protection channels, stiffening UA profiles, wide span beams, cassettes, panels etc.
The profile shears effortlessly cuts across angles and profiles. 

View
PN 4360

Profile Nibblers PN 4360

up to 2.0 mm steel

Cold cutting without sparks.
Cutting roof sheet, sheet piling, etc., up to a profile depth of 79 mm.

Ideal for:

  • halls, factories, roof and wall in corrugated materials
  • roofers
  • shop intallation, etc.

View
1913

Pneumatic Metal Shears 1913

up to 1.3 mm steel

Ideal shears for installation companies, assembly and craft and general purposes where pneumatic drive is desired.

Cutting air ducts, sandwich board, making a cold bridge and a thousands of other applications.

View
19/3520

Pneumatic Metal Shears 19/3520

up to 2.0 mm steel

Profile shear with large blade opening, ideal for cutting over thickening of the material (for example ripples in cable ducts and overlaps) and for use in explosion hazardous areas.

View
AK 3010 Ni-MH

Cordless Metal Shear AK 3010 Ni-MH

up to 1.0 mm sheet metal

Agile shear, handy for tight radii (50 mm) and therefore ideal for roof plumbers, interior fittings (for example, ceiling construction - installation of spots) and motor vehicle workshops (for example, when installing sun roofs).

5-piece 12 volt professional set AK 3010 Ni-MH consists of:
1 cordless shear AK 3010,
2 batteries MXL12,
1 charger RC and
1 transportbox.

View
AK 3013 Ni-MH

Cordless Metal Shear AK 3013 Ni-MH

up to 1.3 mm sheet metal

This cordless shear is ideal for cutting and cut outs of sheet metal as well as U, C and L profiles. Cuts burr-free and without deformation. A universal sheet metal working device. Ideal shear for installation, air conditioning, ducting, aircraft manufacturing companies.

5-piece 12 volt professional set AK 3013 Ni-MH consists of:
1 cordless shear AK 3013 Ni-Mh,
2 batteries MXL12,
1 charger RC and
1 transportbox.

View
AK 3016 Ni-MH

Cordless Metal Shear AK 3016 Ni-MH

up to 1.6 mm sheet metal

Ideal for cutting, cut-outs and trimming of all kind of sheets as well as U-,C- and L- profiles. Universal sheet processing device.

5-piece 12 volt professional set AK 3016 Ni-MH consists of:
1 cordless shear AK 3016 Ni-Mh,
2 batteries MXL12,
1 charger RC and
1 transportbox.

View
AK 3520 Ni-MH

Cordless Metal Shear AK 3520 Ni-MH

up to 2.0 mm steel

The profile metal shear AK 3520 is perfectly adapted to the needs of installation companies. It easily separates cable ducts, drywall profiles, but also spiral fold, flat sheets, U-, C- and L-profiles and much more.

5-piece 12 volt professional set AK 3520 Ni-MH consists of:
1 cordless shear AK 3520,
2 batteries MXL12,
1 charger RC and
1 transportbox.

View
AK 3013 Li-Ion

Cordless metal shear 5-pcs.- professional AK 3013 Li-Ion

up to 1.3 mm metal

This cordless shear is ideal for cutting and cut outs of sheet metal as well as U, C and L profiles. Cuts burr-free and without deformation. A universal sheet metal working device. Ideal shear for installation, air conditioning, ducting, aircraft manufacturing companies.

5-piece 18 volt professional set AK 3013 Li-Ion consists of:
1 cordless shear AK 3013
Li-Ion, 
2 batteries (2.0 Ah + 4.0 Ah),
1 charger CLi (30 Min.),
1 transport box.

View
AK 3016 Li-Ion

Cordless metal shear AK 3016 Li-Ion

up to 1.6 mm metal

Ideal for cutting, cut-outs and trimming of all kind of sheets as well as U-,C- and L- profiles. Universal sheet processing device.

5-piece 18 volt professional set AK 3016 Li-Ion consists of:
1 cordless shear AK 3016 Li-Ion, 
2 batteries (2.0 Ah + 4.0 Ah),
1 charger CLi (30 Min.),
1 transport box.

View
AK 3515 Li-Ion

Cordless Metal Stud Shear 5-pcs.-craftsman AK 3515 Li-Ion

up to 2.3 mm steel

Due to the high performance, the low-vibration and soft cut ideal for separating UA stiffening profiles (up to 2.0 mm steel!) and for C-, CW- and even UA-profiles in drywall construction. Saves the dangerous work with the angle grinder. No flying sparks, making it ideal for cutting indoors.

5-piece 18 volt professional set AK 3515 Li-Ion consists of:
1 cordless shear AK 3515 Li-Ion, 
2 batteries (2.0 Ah + 4.0 Ah),
1 charger CLi (30 Min.)
1 transport box.

View
TYPE 1

Attachments TYPE 1

up to 1.3 mm steel

These attachments are tools with many professional refinements, because the home handyman deserves the same efficient working aids as the trained craftsman. He too, should profit from the experience gained.

It is a indispensable tool for any metalworker, who has to cut metal occasional, without any deforming to surface and need of no after-work due to the double cutting system.

View