Automotive

Metal Shear SD5-1

up to 1.0 mm steel

The SD5-1 is a very manoeuvrable shear and can make short turns (smallest inner radius 50 mm).
This is therefore the ideal shear for zinc processors, interior construction, body shops, garage companies and damage repair!

Universal Slitting Shear SD7-1

up to 2.0 mm steel 

The universal shear for straight lines and curves. Ideal for the automotive and commercial vehicle bodywork.

Useable like SD5-1, but with double capacity. Ideal for utility vehicles. Cutting steps and seams. Good curve ability (tightest radius 50 mm). 

Universal Shear UVS-1

up to 1.0 mm steel or 3.0 mm plastics

The Universal Shear UVS-1 is mostly used for interior-work, in buses, vans & trucks, to line or panel the roof, side or floor.

Tightest radius in plastic 30 mm and 50 mm metal to the left or right, depending on the thickness of the material.

Pneumatic Metal Shears 1910

up to 1.0 mm steel

Very manoeuvrable shear which makes short turns (smallest inner radius 50 mm).
This is the ideal shear for zinc processors, interior construction and garage companies!

Pneumatic Metal Shears 1913

up to 1.3 mm steel

Ideal shears for installation companies, assembly and craft and general purposes where pneumatic drive is desired.

Cutting air ducts, sandwich board, making a cold bridge and a thousands of other applications.

Pneumatic Metal Shears 1920

up to 2.0 mm steel

This powerful shear is ideal for cutting U-, C-, O- and L-profiles and is particularly suitable for construction companies, air duct construction, switch cabinets etc., so wherever a higher capacity is desirable and / or spark-free worked to become

Pneumatic Radius Seam Metal Shears 19/3514-7R

up to 2.0 mm steel

Ideal for short turns (smallest inner radius 45 mm) and straight sections up to 2 mm plate material. Cuts pleats and thickenings.

Ideal shear for the recycling and the waste processing industry and wherever a high capacity is desirable and / or needs to be spark-free.

Cordless Metal Shear AK 3010 Ni-MH

up to 1.0 mm sheet metal

Agile shear, handy for tight radii (50 mm) and therefore ideal for roof plumbers, interior fittings (for example, ceiling construction - installation of spots) and motor vehicle workshops (for example, when installing sun roofs).

5-piece 12 volt professional set AK 3010 Ni-MH consists of:
1 cordless shear AK 3010,
2 batteries MXL12,
1 charger RC and
1 transportbox.

Cordless metal shear 5-pcs.- professional AK 3010 Li-Ion

up to 1.0 mm steel

The AK 3010 Li-Ion is a very manoeuvrable shear and can make short turns (smallest inner radius 50 mm).
This is therefore the ideal shear for zinc processors, interior construction, body shops, garage companies and damage repair!

5-piece 18 volt professional set AK 3010 Li-Ion consists of:
1 cordless shear AK 3010 Li-Ion, 
2 batteries (2.0 Ah + 4.0 Ah),
1 charger CLi (30 Min.)
1 transport box.