Airconditioning Heating Ventilating Installers

Seam Metal Shear 3514-2

up to 2.0 mm, or 4x0.9 mm steel, or 6x0.75 mm light metal

Cold cutting without flying sparks!

This shear is ideal for cutting spiral ducts, roof seams, cross seams, ridge seams and folds of sheet iron, aluminum, lead, copper, zinc or stainless steel. Cuts roller shutter boxes, cover caps, grids and wire in cage- and aviary construction (flush-edged!).

Radius-Seam Metal Shear 3514-7R

up to 2.0 mm, or 4x0.75 mm steel

Cold cutting without flying sparks! Ideal for cutting recesses in spiral ducts and sheets of all kinds. Cuts straight and tight radii (min. 45 mm ø) in sheets and even over seams.

Ideal for air and climate technology, installation companies, truck workshops, metalworking companies etc.

Pneumatic Seam Metal Shears 19/3514-2

up to 2.0 mm steel

Ideal for cutting materials with thickened areas, seamed roofing membranes, spiral- and seam-folded tubes (even over the 4-fold seam), mesh, barrels, aluminum tear plate, sheet, stainless steel, Inox, aluminum, copper, zinc, U-shaped, C-,O- and L-profiles etc.

Pneumatic Radius Seam Metal Shears 19/3514-7R

up to 2.0 mm steel

Ideal for short turns (smallest inner radius 45 mm) and straight sections up to 2 mm plate material. Cuts pleats and thickenings.

Ideal shear for the recycling and the waste processing industry and wherever a high capacity is desirable and / or needs to be spark-free.

Cordless Radius Seam Metal Shear AK 3514-7R Ni-MH

Cordless Seam Metal Shear 5-pcs.-professional AK 3514-2 Li-Ion

up to 2.0 mm, or 4x0.9 mm steel, or 6x0.75 mm light metal

Cold cutting without flying sparks!

This shear is ideal for cutting spiral ducts, roof seams, cross seams, ridge seams and folds of sheet iron, aluminum, lead, copper, zinc or stainless steel. Cuts roller shutter boxes, cover caps, grids and wire in cage- and aviary construction (flush-edged!).

5-piece 18 volt professional set AK 3514-2 Li-Ion consists of:
1 cordless shear AK 3514-2 Li-Ion, 
2 batteries (2.0 Ah + 4.0 Ah),
1 charger CLi (30 Min.),
1 transport box.

Cordless Radius Seam Metal Shear AK 3514-7R Li-Ion

up to 2.0 mm, or 4x0.75 mm steel

Cold cutting without flying sparks! Ideal for cutting recesses in spiral ducts and sheets of all kinds. Cuts straight and tight radii (min. 45 mm ø) in sheets and even over seams.

Ideal for air and climate technology, installation companies, truck workshops, metalworking companies etc.

5-piece 18 volt professional set AK 3514-7R Li-Ion consists of:
1 cordless shear AK 3514-7R Li-Ion, 
2 batteries (2.0 Ah + 4.0 Ah),
1 charger CLi (30 Min.),
1 transport box.