METAL SHEARS - PNEUMATIC The air-driven scissors from the 18-series (1810, 1813, 1820 etc.) have been replaced by the 19-series. Push here (18-series) to go to the 18-series information. Machine-Type Max. cutting capacity Working speed Tightest radius Weight 400 N/mm2 600 N/mm2 800 N/mm2 250 N/mm2 1910 1 mm/ 19 ga. 0.7 mm/ 21 ga. 0.4 mm/ 24 ga. 1.5 mm/ 16 ga. 9 m/min. 50 mm/ 2 inch 1.3 kg Ideal for body-coach workshops Short curves possible Installation of car sun roofs Successor of the 1810 Air-consumption at 6 bar/ min.: 0.18 m3 Motor capacity: 200 Watt Noise: 78,2 db(A) More information... 1913 1.3 mm/ 18 ga. 1.0 mm/ 19 ga. 0.7 mm/ 21 ga. 2.0 mm/ 14 ga. 9 m/min 100 mm/ 4 inch 1.3 kg Ideal for installation, air conditioning, ducting, aircraft manufacturing For application in hazardous (explosive) areas Successor of the 1813 Air-consumption at 6 bar/ min.: 0.18 m3 Motor capacity: 200 Watt Noise: 78,2 db(A) More information... 1920 2.0 mm/ 14 ga. 1.5 mm/ 16 ga. 1.3 mm/ 18 ga. 3.0 mm/ 10 ga. 9 m/min 200 mm/ 8 inch 1.3 kg Rugged tool for higher cutting capacity Ideal for: - Sheet metal workshops - Air conditioning - Control cabinet fabrication For application in hazardous (explosive) areas Successor of the 1820 Air-consumption at 6 bar/ min.: 0.18 m3 Motor capacity: 200 Watt Noise: 78,2 db(A) More information... 19/3514-2 2.0 mm/ 14 ga. 1.5 mm/ 16 ga. 1.3 mm/ 18 ga. 3.0 mm/ 10 ga. 9 m/min 200 mm/ 8 inch 1.3 kg Ideal for recycling companies, because of cutting through seams in barrels, also for cutting open lids in barrels, to empty the contents Important, if contents are inflammable, Pneumatic Metal shear cuts without sparks Successor of the 18/3514-2 Air-consumption at 6 bar/ min.: 0.18 m3 Motor capacity: 200 Watt Noise: 78,2 db(A) More information... 19/3514-7R 2.0 mm/ 14 ga. 1.5 mm/ 16 ga. 1.3 mm/ 18 ga. 3.0 mm/ 10 ga. 9 m/min 45 mm/ 1 ¾ inch 1.3 kg Cutting of a small radius, outside or inside Ideal for inside cutting in spiral ducts, through the seams Successor of the 18/3514-7R Starting hole ø 14 mm Air-consumption at 6 bar/ min.: 0.18 m3 Motor capacity: 200 Watt Noise: 78,2 db(A) More information... 19/3520 2.0 mm/ 14 ga. 1.5 mm/ 16 ga. 1.3 mm/ 18 ga. 3.0 mm/ 10 ga. 9 m/min. 200 mm/ 8 inch 1.3 kg Ideal for cutting metal up to 2 mm, also through profiles and steel studs Successor of the 18/3520 Air-consumption at 6 bar/ min.: 0.18 m3 Motor capacity: 200 Watt Noise: 78,2 db(A) More information...

INFO:	400 N/mm2: Steel 600 N/mm2: Stainless steel, V2A etc. 800 N/mm2: Stainless steel, V4A etc. 250 N/mm2: Aluminium, Zinc, Copper, Non-ferrous metals etc.

Max Draenert GmbH & Co KG Electric - Cordless - Pneumatic Tools - Machines
Factory I:	Administration	D-73777 Deizisau	P.O.Box 1120
	Manufacturing shears	D-73779 Deizisau	Gutenbergstrasse 15-17
	Phone +49-7153-8217-0 Fax +49-7153-8217-66		GERMANY
Factory II:	Manufacturing Roofing System	D-73779 Deizisau	Seewiesenweg 1

webmaster@dracotools.com